| Home · All Classes · Modules |
The QNetworkReply class contains the data and headers for a request sent with QNetworkAccessManager More...
Inherits QIODevice.
The QNetworkReply class contains the data and headers for a request sent with QNetworkAccessManager
The QNetworkReply class contains the data and meta data related to a request posted with QNetworkAccessManager. Like QNetworkRequest, it contains a URL and headers (both in parsed and raw form), some information about the reply's state and the contents of the reply itself.
QNetworkReply is a sequential-access QIODevice, which means that once data is read from the object, it no longer kept by the device. It is therefore the application's responsibility to keep this data if it needs to. Whenever more data is received from the network and processed, the readyRead() signal is emitted.
The downloadProgress() signal is also emitted when data is received, but the number of bytes contained in it may not represent the actual bytes received, if any transformation is done to the contents (for example, decompressing and removing the protocol overhead).
Even though QNetworkReply is a QIODevice connected to the contents of the reply, it also emits the uploadProgress() signal, which indicates the progress of the upload for operations that have such content.
Note: Do not delete the object in the slot connected to the error() or finished() signal. Use deleteLater().
Indicates all possible error conditions found during the processing of the request.
| Constant | Value | Description |
|---|---|---|
| QNetworkReply.NoError | 0 | no error condition. Note: When the HTTP protocol returns a redirect no error will be reported. You can check if there is a redirect with the QNetworkRequest.RedirectionTargetAttribute attribute. |
| QNetworkReply.ConnectionRefusedError | 1 | the remote server refused the connection (the server is not accepting requests) |
| QNetworkReply.RemoteHostClosedError | 2 | the remote server closed the connection prematurely, before the entire reply was received and processed |
| QNetworkReply.HostNotFoundError | 3 | the remote host name was not found (invalid hostname) |
| QNetworkReply.TimeoutError | 4 | the connection to the remote server timed out |
| QNetworkReply.OperationCanceledError | 5 | the operation was canceled via calls to abort() or close() before it was finished. |
| QNetworkReply.SslHandshakeFailedError | 6 | the SSL/TLS handshake failed and the encrypted channel could not be established. The sslErrors() signal should have been emitted. |
| QNetworkReply.TemporaryNetworkFailureError | 7 | the connection was broken due to disconnection from the network, however the system has initiated roaming to another access point. The request should be resubmitted and will be processed as soon as the connection is re-established. |
| QNetworkReply.ProxyConnectionRefusedError | 101 | the connection to the proxy server was refused (the proxy server is not accepting requests) |
| QNetworkReply.ProxyConnectionClosedError | 102 | the proxy server closed the connection prematurely, before the entire reply was received and processed |
| QNetworkReply.ProxyNotFoundError | 103 | the proxy host name was not found (invalid proxy hostname) |
| QNetworkReply.ProxyTimeoutError | 104 | the connection to the proxy timed out or the proxy did not reply in time to the request sent |
| QNetworkReply.ProxyAuthenticationRequiredError | 105 | the proxy requires authentication in order to honour the request but did not accept any credentials offered (if any) |
| QNetworkReply.ContentAccessDenied | 201 | the access to the remote content was denied (similar to HTTP error 401) |
| QNetworkReply.ContentOperationNotPermittedError | 202 | the operation requested on the remote content is not permitted |
| QNetworkReply.ContentNotFoundError | 203 | the remote content was not found at the server (similar to HTTP error 404) |
| QNetworkReply.AuthenticationRequiredError | 204 | the remote server requires authentication to serve the content but the credentials provided were not accepted (if any) |
| QNetworkReply.ContentReSendError | 205 | the request needed to be sent again, but this failed for example because the upload data could not be read a second time. |
| QNetworkReply.ProtocolUnknownError | 301 | the Network Access API cannot honor the request because the protocol is not known |
| QNetworkReply.ProtocolInvalidOperationError | 302 | the requested operation is invalid for this protocol |
| QNetworkReply.UnknownNetworkError | 99 | an unknown network-related error was detected |
| QNetworkReply.UnknownProxyError | 199 | an unknown proxy-related error was detected |
| QNetworkReply.UnknownContentError | 299 | an unknown error related to the remote content was detected |
| QNetworkReply.ProtocolFailure | 399 | a breakdown in protocol was detected (parsing error, invalid or unexpected responses, etc.) |
See also error().
The parent argument, if not None, causes self to be owned by Qt instead of PyQt.
Creates a QNetworkReply object with parent parent.
You cannot directly instantiate QNetworkReply objects. Use QNetworkAccessManager functions to do that.
This method is abstract and should be reimplemented in any sub-class.
Aborts the operation immediately and close down any network connections still open. Uploads still in progress are also aborted.
See also close().
Returns the attribute associated with the code code. If the attribute has not been set, it returns an invalid QVariant (type QVariant.Null).
You can expect the default values listed in QNetworkRequest.Attribute to be applied to the values returned by this function.
See also setAttribute() and QNetworkRequest.Attribute.
Reimplemented from QIODevice.close().
Closes this device for reading. Unread data is discarded, but the network resources are not discarded until they are finished. In particular, if any upload is in progress, it will continue until it is done.
The finished() signal is emitted when all operations are over and the network resources are freed.
See also abort() and finished().
Returns the error that was found during the processing of this request. If no error was found, returns NoError.
See also setError().
Returns true if the raw header of name headerName was sent by the remote server
See also rawHeader().
Returns the value of the known header header, if that header was sent by the remote server. If the header was not sent, returns an invalid QVariant.
See also rawHeader(), setHeader(), and QNetworkRequest.header().
This method is also a Qt slot with the C++ signature void ignoreSslErrors().
If this function is called, SSL errors related to network connection will be ignored, including certificate validation errors.
Note that calling this function without restraint may pose a security risk for your application. Use it with care.
This function can be called from the slot connected to the sslErrors() signal, which indicates which errors were found.
See also sslConfiguration(), sslErrors(), and QSslSocket.ignoreSslErrors().
This is an overloaded function.
If this function is called, the SSL errors given in errors will be ignored.
Note that you can set the expected certificate in the SSL error: If, for instance, you want to issue a request to a server that uses a self-signed certificate, consider the following snippet:
QList<QSslCertificate> cert = QSslCertificate.fromPath(QLatin1String("server-certificate.pem")); QSslError error(QSslError.SelfSignedCertificate, cert.at(0)); QList<QSslError> expectedSslErrors; expectedSslErrors.append(error); QNetworkReply *reply = manager.get(QNetworkRequest(QUrl("https://server.tld/index.html"))); reply->ignoreSslErrors(expectedSslErrors); // here connect signals etc.
Multiple calls to this function will replace the list of errors that were passed in previous calls. You can clear the list of errors you want to ignore by calling this function with an empty list.
This function was introduced in Qt 4.6.
See also sslConfiguration(), sslErrors(), and QSslSocket.ignoreSslErrors().
Returns true when the reply has finished or was aborted.
This function was introduced in Qt 4.6.
See also isRunning().
Returns true when the request is still processing and the reply has not finished or was aborted yet.
This function was introduced in Qt 4.6.
See also isFinished().
Returns the QNetworkAccessManager that was used to create this QNetworkReply object. Initially, it is also the parent object.
Returns the operation that was posted for this reply.
See also setOperation().
Returns the raw contents of the header headerName as sent by the remote server. If there is no such header, returns an empty byte array, which may be indistinguishable from an empty header. Use hasRawHeader() to verify if the server sent such header field.
See also setRawHeader(), hasRawHeader(), and header().
Returns a list of headers fields that were sent by the remote server, in the order that they were sent. Duplicate headers are merged together and take place of the latter duplicate.
Returns a list of raw header pairs.
Returns the size of the read buffer, in bytes.
See also setReadBufferSize().
Returns the request that was posted for this reply. In special, note that the URL for the request may be different than that of the reply.
See also QNetworkRequest.url(), url(), and setRequest().
Sets the attribute code to have value value. If code was previously set, it will be overridden. If value is an invalid QVariant, the attribute will be unset.
See also attribute() and QNetworkRequest.setAttribute().
Sets the error condition to be errorCode. The human-readable message is set with errorString.
Calling setError() does not emit the error(QNetworkReply.NetworkError) signal.
See also error() and errorString().
Sets the reply as finished.
After having this set the replies data must not change.
This function was introduced in Qt 4.8.
See also finished() and isFinished().
Sets the known header header to be of value value. The corresponding raw form of the header will be set as well.
See also header(), setRawHeader(), and QNetworkRequest.setHeader().
Sets the associated operation for this object to be operation. This value will be returned by operation().
Note: the operation should be set when this object is created and not changed again.
See also operation() and setRequest().
Sets the raw header headerName to be of value value. If headerName was previously set, it is overridden. Multiple HTTP headers of the same name are functionally equivalent to one single header with the values concatenated, separated by commas.
If headerName matches a known header, the value value will be parsed and the corresponding parsed form will also be set.
See also rawHeader(), header(), setHeader(), and QNetworkRequest.setRawHeader().
Sets the size of the read buffer to be size bytes. The read buffer is the buffer that holds data that is being downloaded off the network, before it is read with QIODevice.read(). Setting the buffer size to 0 will make the buffer unlimited in size.
QNetworkReply will try to stop reading from the network once this buffer is full (i.e., bytesAvailable() returns size or more), thus causing the download to throttle down as well. If the buffer is not limited in size, QNetworkReply will try to download as fast as possible from the network.
Unlike QAbstractSocket.setReadBufferSize(), QNetworkReply cannot guarantee precision in the read buffer size. That is, bytesAvailable() can return more than size.
See also readBufferSize().
Sets the associated request for this object to be request. This value will be returned by request().
Note: the request should be set when this object is created and not changed again.
See also request() and setOperation().
Sets the SSL configuration for the network connection associated with this request, if possible, to be that of config.
See also sslConfiguration().
Sets the URL being processed to be url. Normally, the URL matches that of the request that was posted, but for a variety of reasons it can be different (for example, a file path being made absolute or canonical).
See also url(), request(), and QNetworkRequest.url().
Returns the SSL configuration and state associated with this reply, if SSL was used. It will contain the remote server's certificate, its certificate chain leading to the Certificate Authority as well as the encryption ciphers in use.
The peer's certificate and its certificate chain will be known by the time sslErrors() is emitted, if it's emitted.
See also setSslConfiguration().
Returns the URL of the content downloaded or uploaded. Note that the URL may be different from that of the original request.
See also request(), setUrl(), and QNetworkRequest.url().
This is the default overload of this signal.
This signal is emitted to indicate the progress of the download part of this network request, if there's any. If there's no download associated with this request, this signal will be emitted once with 0 as the value of both bytesReceived and bytesTotal.
The bytesReceived parameter indicates the number of bytes received, while bytesTotal indicates the total number of bytes expected to be downloaded. If the number of bytes to be downloaded is not known, bytesTotal will be -1.
The download is finished when bytesReceived is equal to bytesTotal. At that time, bytesTotal will not be -1.
Note that the values of both bytesReceived and bytesTotal may be different from size(), the total number of bytes obtained through read() or readAll(), or the value of the header(ContentLengthHeader). The reason for that is that there may be protocol overhead or the data may be compressed during the download.
See also uploadProgress() and bytesAvailable().
This is the default overload of this signal.
This signal is emitted when the reply detects an error in processing. The finished() signal will probably follow, indicating that the connection is over.
The code parameter contains the code of the error that was detected. Call errorString() to obtain a textual representation of the error condition.
Note: Do not delete the object in the slot connected to this signal. Use deleteLater().
See also error() and errorString().
This is the default overload of this signal.
This signal is emitted when the reply has finished processing. After this signal is emitted, there will be no more updates to the reply's data or metadata.
Unless close() has been called, the reply will be still be opened for reading, so the data can be retrieved by calls to read() or readAll(). In particular, if no calls to read() were made as a result of readyRead(), a call to readAll() will retrieve the full contents in a QByteArray.
This signal is emitted in tandem with QNetworkAccessManager.finished() where that signal's reply parameter is this object.
Note: Do not delete the object in the slot connected to this signal. Use deleteLater().
You can also use isFinished() to check if a QNetworkReply has finished even before you receive the finished() signal.
See also setFinished(), QNetworkAccessManager.finished(), and isFinished().
This is the default overload of this signal.
This signal is emitted whenever the metadata in this reply changes. metadata is any information that is not the content (data) itself, including the network headers. In the majority of cases, the metadata will be known fully by the time the first byte of data is received. However, it is possible to receive updates of headers or other metadata during the processing of the data.
See also header(), rawHeaderList(), rawHeader(), and hasRawHeader().
This is the default overload of this signal.
This signal is emitted if the SSL/TLS session encountered errors during the set up, including certificate verification errors. The errors parameter contains the list of errors.
To indicate that the errors are not fatal and that the connection should proceed, the ignoreSslErrors() function should be called from the slot connected to this signal. If it is not called, the SSL session will be torn down before any data is exchanged (including the URL).
This signal can be used to display an error message to the user indicating that security may be compromised and display the SSL settings (see sslConfiguration() to obtain it). If the user decides to proceed after analyzing the remote certificate, the slot should call ignoreSslErrors().
See also QSslSocket.sslErrors(), QNetworkAccessManager.sslErrors(), sslConfiguration(), and ignoreSslErrors().
This is the default overload of this signal.
This signal is emitted to indicate the progress of the upload part of this network request, if there's any. If there's no upload associated with this request, this signal will not be emitted.
The bytesSent parameter indicates the number of bytes uploaded, while bytesTotal indicates the total number of bytes to be uploaded. If the number of bytes to be uploaded could not be determined, bytesTotal will be -1.
The upload is finished when bytesSent is equal to bytesTotal. At that time, bytesTotal will not be -1.
See also downloadProgress().
| PyQt 4.10.1 for MacOS | Copyright © Riverbank Computing Ltd and Nokia 2012 | Qt 4.8.4 |