Home · All Classes · Modules

QVideoFrame Class Reference
^{^{[QtMultimedia module]}}

The QVideoFrame class provides a representation of a frame of video data. More...

Types

enum FieldType { ProgressiveFrame, TopField, BottomField, InterlacedFrame }
enum PixelFormat { Format_Invalid, Format_ARGB32, Format_ARGB32_Premultiplied, Format_RGB32, ..., Format_User }

Methods

__init__ (self)
__init__ (self, QAbstractVideoBuffer buffer, QSize size, PixelFormat format)
__init__ (self, int bytes, QSize size, int bytesPerLine, PixelFormat format)
__init__ (self, QImage image)
__init__ (self, QVideoFrame other)
sip.voidptr bits (self)
int bytesPerLine (self)
int endTime (self)
FieldType fieldType (self)
QVariant handle (self)
QAbstractVideoBuffer.HandleType handleType (self)
int height (self)
bool isMapped (self)
bool isReadable (self)
bool isValid (self)
bool isWritable (self)
bool map (self, QAbstractVideoBuffer.MapMode mode)
QAbstractVideoBuffer.MapMode mapMode (self)
int mappedBytes (self)
PixelFormat pixelFormat (self)
setEndTime (self, int time)
setFieldType (self, FieldType)
setStartTime (self, int time)
QSize size (self)
int startTime (self)
unmap (self)
int width (self)

Static Methods

QImage.Format imageFormatFromPixelFormat (PixelFormat format)
PixelFormat pixelFormatFromImageFormat (QImage.Format format)

Detailed Description

The QVideoFrame class provides a representation of a frame of video data.

A QVideoFrame encapsulates the data of a video frame, and information about the frame.

The contents of a video frame can be mapped to memory using the map() function. While mapped the video data can accessed using the bits() function which returns a pointer to a buffer, the total size of which is given by the mappedBytes(), and the size of each line is given by bytesPerLine(). The return value of the handle() function may be used to access frame data using the internal buffer's native APIs.

The video data in a QVideoFrame is encapsulated in a QAbstractVideoBuffer. A QVideoFrame may be constructed from any buffer type by subclassing the QAbstractVideoBuffer class.

Note: QVideoFrame is explicitly shared, any change made to video frame will also apply to any copies.

Type Documentation

QVideoFrame.FieldType

Specifies the field an interlaced video frame belongs to.

Constant	Value	Description
`QVideoFrame.ProgressiveFrame`	`0`	The frame is not interlaced.
`QVideoFrame.TopField`	`1`	The frame contains a top field.
`QVideoFrame.BottomField`	`2`	The frame contains a bottom field.
`QVideoFrame.InterlacedFrame`	`3`	The frame contains a merged top and bottom field.

QVideoFrame.PixelFormat

Enumerates video data types.

Constant	Value	Description
`QVideoFrame.Format_Invalid`	`0`	The frame is invalid.
`QVideoFrame.Format_ARGB32`	`1`	The frame is stored using a 32-bit ARGB format (0xAARRGGBB). This is equivalent to QImage.Format_ARGB32.
`QVideoFrame.Format_ARGB32_Premultiplied`	`2`	The frame stored using a premultiplied 32-bit ARGB format (0xAARRGGBB). This is equivalent to QImage.Format_ARGB32_Premultiplied.
`QVideoFrame.Format_RGB32`	`3`	The frame stored using a 32-bit RGB format (0xffRRGGBB). This is equivalent to QImage.Format_RGB32
`QVideoFrame.Format_RGB24`	`4`	The frame is stored using a 24-bit RGB format (8-8-8). This is equivalent to QImage.Format_RGB888
`QVideoFrame.Format_RGB565`	`5`	The frame is stored using a 16-bit RGB format (5-6-5). This is equivalent to QImage.Format_RGB16.
`QVideoFrame.Format_RGB555`	`6`	The frame is stored using a 16-bit RGB format (5-5-5). This is equivalent to QImage.Format_RGB555.
`QVideoFrame.Format_ARGB8565_Premultiplied`	`7`	The frame is stored using a 24-bit premultiplied ARGB format (8-6-6-5).
`QVideoFrame.Format_BGRA32`	`8`	The frame is stored using a 32-bit ARGB format (0xBBGGRRAA).
`QVideoFrame.Format_BGRA32_Premultiplied`	`9`	The frame is stored using a premultiplied 32bit BGRA format.
`QVideoFrame.Format_BGR32`	`10`	The frame is stored using a 32-bit BGR format (0xBBGGRRff).
`QVideoFrame.Format_BGR24`	`11`	The frame is stored using a 24-bit BGR format (0xBBGGRR).
`QVideoFrame.Format_BGR565`	`12`	The frame is stored using a 16-bit BGR format (5-6-5).
`QVideoFrame.Format_BGR555`	`13`	The frame is stored using a 16-bit BGR format (5-5-5).
`QVideoFrame.Format_BGRA5658_Premultiplied`	`14`	The frame is stored using a 24-bit premultiplied BGRA format (5-6-5-8).
`QVideoFrame.Format_AYUV444`	`15`	The frame is stored using a packed 32-bit AYUV format (0xAAYYUUVV).
`QVideoFrame.Format_AYUV444_Premultiplied`	`16`	The frame is stored using a packed premultiplied 32-bit AYUV format (0xAAYYUUVV).
`QVideoFrame.Format_YUV444`	`17`	The frame is stored using a 24-bit packed YUV format (8-8-8).
`QVideoFrame.Format_YUV420P`	`18`	The frame is stored using an 8-bit per component planar YUV format with the U and V planes horizontally and vertically sub-sampled, i.e. the height and width of the U and V planes are half that of the Y plane.
`QVideoFrame.Format_YV12`	`19`	The frame is stored using an 8-bit per component planar YVU format with the V and U planes horizontally and vertically sub-sampled, i.e. the height and width of the V and U planes are half that of the Y plane.
`QVideoFrame.Format_UYVY`	`20`	The frame is stored using an 8-bit per component packed YUV format with the U and V planes horizontally sub-sampled (U-Y-V-Y), i.e. two horizontally adjacent pixels are stored as a 32-bit macropixel which has a Y value for each pixel and common U and V values.
`QVideoFrame.Format_YUYV`	`21`	The frame is stored using an 8-bit per component packed YUV format with the U and V planes horizontally sub-sampled (Y-U-Y-V), i.e. two horizontally adjacent pixels are stored as a 32-bit macropixel which has a Y value for each pixel and common U and V values.
`QVideoFrame.Format_NV12`	`22`	The frame is stored using an 8-bit per component semi-planar YUV format with a Y plane (Y) followed by a horizontally and vertically sub-sampled, packed UV plane (U-V).
`QVideoFrame.Format_NV21`	`23`	The frame is stored using an 8-bit per component semi-planar YUV format with a Y plane (Y) followed by a horizontally and vertically sub-sampled, packed VU plane (V-U).
`QVideoFrame.Format_IMC1`	`24`	The frame is stored using an 8-bit per component planar YUV format with the U and V planes horizontally and vertically sub-sampled. This is similar to the Format_YUV420P type, except that the bytes per line of the U and V planes are padded out to the same stride as the Y plane.
`QVideoFrame.Format_IMC2`	`25`	The frame is stored using an 8-bit per component planar YUV format with the U and V planes horizontally and vertically sub-sampled. This is similar to the Format_YUV420P type, except that the lines of the U and V planes are interleaved, i.e. each line of U data is followed by a line of V data creating a single line of the same stride as the Y data.
`QVideoFrame.Format_IMC3`	`26`	The frame is stored using an 8-bit per component planar YVU format with the V and U planes horizontally and vertically sub-sampled. This is similar to the Format_YV12 type, except that the bytes per line of the V and U planes are padded out to the same stride as the Y plane.
`QVideoFrame.Format_IMC4`	`27`	The frame is stored using an 8-bit per component planar YVU format with the V and U planes horizontally and vertically sub-sampled. This is similar to the Format_YV12 type, except that the lines of the V and U planes are interleaved, i.e. each line of V data is followed by a line of U data creating a single line of the same stride as the Y data.
`QVideoFrame.Format_Y8`	`28`	The frame is stored using an 8-bit greyscale format.
`QVideoFrame.Format_Y16`	`29`	The frame is stored using a 16-bit linear greyscale format. Little endian.
`QVideoFrame.Format_User`	`1000`	Start value for user defined pixel formats.

Method Documentation

QVideoFrame.init (self)

Constructs a null video frame.

QVideoFrame.init (self, QAbstractVideoBuffer buffer, QSize size, PixelFormat format)

Constructs a video frame from a buffer of the given pixel format and size in pixels.

Note: This doesn't increment the reference count of the video buffer.

QVideoFrame.init (self, int bytes, QSize size, int bytesPerLine, PixelFormat format)

Constructs a video frame of the given pixel format and size in pixels.

The bytesPerLine (stride) is the length of each scan line in bytes, and bytes is the total number of bytes that must be allocated for the frame.

QVideoFrame.init (self, QImage image)

Constructs a video frame from an image.

Note: This will construct an invalid video frame if there is no frame type equivalent to the image format.

See also pixelFormatFromImageFormat().

QVideoFrame.init (self, QVideoFrame other)

Constructs a copy of other.

sip.voidptr QVideoFrame.bits (self)

Returns a pointer to the start of the frame data buffer.

This value is only valid while the frame data is mapped.

See also map(), mappedBytes(), and bytesPerLine().

int QVideoFrame.bytesPerLine (self)

Returns the number of bytes in a scan line.

Note: This is the bytes per line of the first plane only. The bytes per line of subsequent planes should be calculated as per the frame type.

This value is only valid while the frame data is mapped.

See also bits(), map(), and mappedBytes().

int QVideoFrame.endTime (self)

Returns the presentation time when a frame should stop being displayed.

See also setEndTime().

FieldType QVideoFrame.fieldType (self)

Returns the field an interlaced video frame belongs to.

If the video is not interlaced this will return WholeFrame.

See also setFieldType().

QVariant QVideoFrame.handle (self)

Returns a type specific handle to a video frame's buffer.

For an OpenGL texture this would be the texture ID.

QAbstractVideoBuffer.HandleType QVideoFrame.handleType (self)

Returns the type of a video frame's handle.

int QVideoFrame.height (self)

Returns the height of a video frame.

QImage.Format QVideoFrame.imageFormatFromPixelFormat (PixelFormat format)

Returns an image format equivalent to a video frame pixel format. If there is no equivalent format QImage.Format_Invalid is returned instead.

bool QVideoFrame.isMapped (self)

Identifies if a video frame's contents are currently mapped to system memory.

This is a convenience function which checks that the MapMode of the frame is not equal to QAbstractVideoBuffer.NotMapped.

Returns true if the contents of the video frame are mapped to system memory, and false otherwise.

See also mapMode() and QAbstractVideoBuffer.MapMode.

bool QVideoFrame.isReadable (self)

Identifies if the mapped contents of a video frame were read from the frame when it was mapped.

This is a convenience function which checks if the MapMode contains the QAbstractVideoBuffer.WriteOnly flag.

Returns true if the contents of the mapped memory were read from the video frame, and false otherwise.

See also mapMode() and QAbstractVideoBuffer.MapMode.

bool QVideoFrame.isValid (self)

Identifies whether a video frame is valid.

An invalid frame has no video buffer associated with it.

Returns true if the frame is valid, and false if it is not.

bool QVideoFrame.isWritable (self)

Identifies if the mapped contents of a video frame will be persisted when the frame is unmapped.

This is a convenience function which checks if the MapMode contains the QAbstractVideoBuffer.WriteOnly flag.

Returns true if the video frame will be updated when unmapped, and false otherwise.

Note: The result of altering the data of a frame that is mapped in read-only mode is undefined. Depending on the buffer implementation the changes may be persisted, or worse alter a shared buffer.

See also mapMode() and QAbstractVideoBuffer.MapMode.

bool QVideoFrame.map (self, QAbstractVideoBuffer.MapMode mode)

Maps the contents of a video frame to memory.

The map mode indicates whether the contents of the mapped memory should be read from and/or written to the frame. If the map mode includes the QAbstractVideoBuffer.ReadOnly flag the mapped memory will be populated with the content of the video frame when mapped. If the map mode inclues the QAbstractVideoBuffer.WriteOnly flag the content of the mapped memory will be persisted in the frame when unmapped.

While mapped the contents of a video frame can be accessed directly through the pointer returned by the bits() function.

When access to the data is no longer needed be sure to call the unmap() function to release the mapped memory.

Returns true if the buffer was mapped to memory in the given mode and false otherwise.

See also unmap(), mapMode(), and bits().